U-POL 874 BLEND #9 Fade Out Reducer BLENDER Premium Aerosol, 450ml Aerosol
- Invisible blended finish
- For use with all coatings
- Suitable for SMART repairs
Shake the aerosol can for at least 2 minutes before use.
Sand blend area with sanding soap or 800 - 1200 grit sandpaper to prepare blend area.
Holding the aerosol approximately 10" from the panel, apply a light mist coat over the bled area of the freshly applied clearcoat or topcoat.
Apply 2-3 light coats of BLEND#9 immediately after clearcoat is applied to blend edge.
Follow the clearcoat or topcoat manufacturers instructions for flash off and drying.