Fusor® 123/126 Non-Sag Seam Sealer (Fast)
Product Information
LORD Fusor® 123/126 sealer is a two-component, urethane-based seam sealer used for duplicating factory appearance on truck bed, tooled door skin, floor pan and core support seams. Fusor 123/126 sealer is used in applications which require a non-sag cosmetic seam sealer with reduced cycle time.
Fusor 123 = 10.1 oz (300 mL)
Fusor 126 = 1.7 oz (50 mL)
Shelf Life
Shelf life is 24 months from date of manufacture when stored at 75°F (24°C) in original, unopened container.
Substrates
Apply over 2K primers; urethane 2K chemistry
OEM Approvals
GM
Features and Benefits
Versatile – bonds to epoxy or urethane primed surfaces; weld through with minimal burn back.
Excellent Appearance – easily duplicates factory appearance; provides extremely flexible seal with no shrinkage, cracking or sagging.
Environmentally Resistant – provides excellent corrosion protection.
Easy to Finish – can be tooled, wiped clean, sanded and/or painted immediately.
Applications
Duplicates factory look on the following seams: truck beds, tooled door skin, floor pan, core support and any other application in which a non-sag cosmetic seam sealer is required and where fast work time is desired.
Typical Properties*
| Appearance | White Paste |
| Work Time | 3-5 minutes @ 70°F (21°C) |
| Paint Time | Immediately; Within 24 hours @ 70°F (21°C) without a scuff |
| Full Cure | 24 hours @ 70°F (21°C) |
*Data is typical and not to be used for specification purposes.
