Finish-Rite HVLP Gravity Feed Primer Spray Gun with 600ml Cup – 2.0mm Tip
Description:
The Finish-Rite H-827P is an HVLP gravity feed spray gun with a 2.0mm tip, built for laying down primer and high-build primer. The larger nozzle handles thicker materials without clogging, and High Volume Low Pressure technology puts more material on the panel and less into the air, so you get less overspray, less waste, and a cleaner work area.
2.0mm: Ideal for primers, primer surfacers, and high-build primers. Need a tip for basecoat or clearcoat? Check out the 1.3mm version of this gun.
Compressor requirement: This gun needs a compressor that can supply at least 6–11 CFM at 45–60 PSI. Small pancake or hobby compressors may not keep up.
Features:
- HVLP design for high transfer efficiency, saves up to 25% material and reduces overspray
- 2.0mm stainless steel nozzle and needle, works with waterborne and solvent-based materials
- Large translucent 600ml gravity-feed cup, so you can see your material level at a glance
- Three adjustment knobs: fluid flow, fan pattern, and air pressure
- Ergonomic grip and lightweight body for less fatigue
- Built-in paint strainer keeps debris out of your finish
What’s in the box:
- HVLP spray gun with 600ml gravity cup
- 1/4" air inlet plug (quick-connect)
- Cup paint strainer/filter
- Multi-purpose service wrench
- Cleaning brush
Specifications:
- Model: H-827P
- Type: HVLP gravity feed
- Nozzle size: 2.0mm
- Nozzle and needle: Stainless steel
- Cup capacity: 600ml
- Air inlet: 1/4"
- Air consumption: 6.0–11 CFM (170–300 L/min)
- Air pressure: 45–60 PSI (3–4 bar)
Pro tip: Clean the gun right after every use with the correct solvent (lacquer thinner or reducer for solvent-based materials, water for waterborne). Primer dries fast in the nozzle, so don't let it sit. Use the included brush and wrench.
