Spray Paint Instructions
Always start by washing the area that you are painting with liquid dish soap and water or wipe the area down with a wax and grease remover. You should then lightly scuff the area that you are painting with a gray scotch-brite pad, this will give the paint something to stick to. If using primer use a red scotch-brite pad before applying primer. After applying primer wait 1 hour (or until fully dried), and then sand with 600 grit sandpaper.
First SHAKE WELL (2-3 min) and test the spray can on something besides your car. Do this to get used to how the can sprays. Then spray the area that you are repairing with 2 to 3 coats of color (or until full coverage is achieved) waiting 10 minutes between coats. If you are using clear coat wait 45 minutes before starting to apply the clear coat. Apply 2 to 3 coats and wait 10 minutes between coats.
First SHAKE WELL (2-3 min) and test the spray can on something besides your car. Do this to get used to how the can sprays. Then spray the area that you are repairing with 2 to 3 coats of color (or until full coverage is achieved) waiting 10 minutes between coats. If you are using clear coat wait 45 minutes before starting to apply the clear coat. Apply 2 to 3 coats and wait 10 minutes between coats.