3M 06396 Automotive Adhesion Promoter

  • $68.00

3M 06396 Automotive Adhesion Promoter
  • 25 total packets packaged in 1 box, 2.5cc per packet. Not detectable by UV light.
  • Use to increase the bond strength of acrylic based tapes to most substrates
  • Works great for low surface energy substrates like rubber and plastic

Liquid primer for enhancing adhesion of 3M Acrylic Foam Tapes for interior and exterior trim applications. Liquid primer packaged in convenient, single-use applicator packets. Strongly recommended for use with 3M Dubble sided tape on exterior body side moldings, trim and claddings, particularly those parts made of injection molded plastics such as TPO and RIM. Can be applied on common low surface energy plastics used for automotive dash and interior trim applications (TPO, PPO, PP, PC, +ABS, etc.). One packet covers approximately 150 square inches of substrate at the recommended coating thickness.

Warning: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. Same ingredients as 3M 4298 Adhesion Promoter Sponge Applicator Packets, detectable by UV light 

We Also Recommend