GreenTec FU2 2K Urethane Primer Filler 4:1 DTM – Gallon Kit with Activator
GreenTec FU2 Fast Urethane 2K Primer Filler – 4:1 Gallon Kit
Professional-Grade High-Build Urethane Primer with Fast Sanding Performance
Lusid Technologies FU2 is a fast-curing, high-build 2K urethane primer filler designed for professional automotive refinishing. Engineered for excellent sand scratch filling and increased shop productivity, FU2 is ready for sanding in approximately 45–90 minutes, depending on temperature and film build.
Its versatile formulation can be used as a high-build primer or as a sealer when properly mixed, making it an excellent choice for automotive collision repair, OEM refinishing, fleet maintenance, and light industrial applications.
Key Features & Benefits
- Fast Drying: Ready to sand in approximately 45–90 minutes.
- High-Build Formula: Excellent sand scratch filling capabilities.
- 4:1 Mixing Ratio: Mix four parts FU2 primer with one part HFU activator.
- DTM Capability: Can be applied directly to properly prepared metal substrates.
- Versatile Application: Suitable for use as a primer or sealer.
- Easy Application: Compatible with HVLP and conventional spray equipment.
- Professional Finish: Designed to provide a smooth foundation for subsequent coatings.
- Multiple Applications: Ideal for vehicle refinishing, OEM, fleet, and light industrial work.
Mixing Instructions
As a Primer:
- 4 parts FU2 Primer
- 1 part HFU Activator
- 1 part selected reducer
As a Sealer:
- 4 parts FU2 Primer
- 1 part HFU Activator
- 3 parts selected reducer
Reducer selection depends on application conditions. FU2 may also be used as DTM according to the manufacturer’s technical data sheet.
Drying & Flash Times at 70°F
- Dust Free: 10–15 minutes
- Air Dry: 30 minutes–1 hour
- Sanding Time: 45–90 minutes
- Topcoat Flash Time: 20 minutes
- Force Dry: 10–15 minutes at 140°F / 60°C panel temperature
- Pot Life: 1 hour at 70°F
Recommended Spray Gun Settings
- HVLP Gravity Feed: 1.2–1.4 mm (Sealer) / 1.6–1.8 mm (Primer)
- Conventional: 1.2–1.4 mm (Sealer) / 1.6–1.8 mm (Primer)
- Film Build: 2–2.5 mils when applied as directed
Surface Compatibility
Suitable for properly prepared:
- Plastic
- Aluminum
- E-Coat
- Steel
- Original Automotive Paint
Application Guidelines
Clean the substrate thoroughly to remove grease, dirt, and other contaminants before application.
Apply two medium-wet coats, allowing approximately 10 minutes of flash time between coats. For best adhesion, sanding is recommended before applying subsequent coatings.
Kit Includes
- 1 Gallon – Lusid Technologies FU2 2K Urethane Primer Filler
- 1 Quart – HFU Activator for FU2
Mixing Ratio: 4:1 Primer to Activator
Important: Reducer is not included. Always consult the manufacturer’s Technical Data Sheet and Safety Data Sheet before use. For professional use with appropriate protective equipment.