U-Pol HIGH #5 Ready to Use 1K High Build Primer, White/Gray/Beige

  • $17.95
  • Save $4.05


HIGH #5 is ready to use high build primer/filler in an aerosol. It is used for priming uneven surfaces before top coating.

High #5 is capable of producing a coating of a film thickness similar to that of a spray gun applied primer. The convenience of using a high build primer in an aerosol means that masking is kept to a minimum. Mixing paint and cleaning spray equipment are avoided as a result of using HIGH #5 leading to savings in time and materials.

HIGH #5 is cromate free and easy to sand.

Part # UP0791V UPO763 UPO783 791 763 783 0791 0763 0783

INSTRUCTIONS 

HIGH #5 can be applied to the following surfaces:

  • Fully cured paint.
  • Polyester body fillers and F.R.P.
  • Thoroughly clean and degrease surfaces with a suitable panel wipe or thinner. Abrade wet or dry with 280-320 grit abrasive, re-clean, dry and degrease. 

Application

  • Shake can thoroughly before use for a minimum of 2 minutes. Apply 1-2 light even coats.
  • Allow 5-10 minutes flash off time between coats.

Drying time

  • Allow 60 minutes before sanding & overcoating.
  • Drying time is dependent upon film thickness, humidity and temperature.

 

UPol U-Pol UP0763 UP0791V UP0783 UPO763 UPO791V UPO783 763 0763


We Also Recommend